OWON MSO Series - Manual (Page 91)

86
Fig.5-7 4：Waveform saving
How to use USB flash disk to storage
Use USB flash disk is to storage acquired data.
Insert U disk into USB port, then press "B" key
and you can save the waveform data into the U disk. There is two formats available for choice: Vector
format and Bitmap which the corresponding name will be WAVE1.BIN 、 WAVE2.BIN 、
WAVE3.BIN……or WAVE1.BMP、WAVE2.BMP、WAVE3.BMP……. Then you can open the files in
computer by connecting USB disk to computer.
Noted: During the U disk saving procedure, some notes such as "Waveform saving" 、"Waveform
saved" 、"USB already connected" 、"USB connection interrupt " etc. will be prompted.
How to search
Searches have different operation according to different targets. Search target
including trigger position, BUS value, and pattern.
1、Search triggers position as following steps:
A、Press "2(SEARCH)" and menu appears.
B、Press "F1" till target display as "Trig position"
C、Press "F2" to start searching and current cursor will stop in the trigger position