OWON MSO Series - Manual (Page 82)

77
Then sequential queue trigger setting finished (refer to Fig.5-61 ) and data ready for
acquisition.
Fig.5-61
：Sequential queue trigger
5. Distributed queue trigger: make BUS as trigger source and dis-continuous setting data
in BUS as trigger condition to generate trigger and also can set 8 data at the same time.
Distributed queue trigger menu refer as
Fig.5-62
Fig.5-62
：Distributed queue trigger menu
Distributed queue trigger function as below:
Function Setting Instruction
Source BUS0～BUS3 Select the trigger source from BUS0~BUS3
Code
0x0000～0xffff
（HEX）
0～65535
Can be set discretionarily between 0x0000 and 0xffff
（HEX）or between 0 and 65535 (DEC）according to
the bus and code setting.