OWON MSO Series - Manual (Page 63)

58
Fig.5-44)
Fig.5-44 Automatic Measurement
How to Implement the Cursor Measurement
Press the CURSOR button to display the cursor measurement function menu (CURS
MEAS) in the screen.
The Cursor Measurement for normal model:
The cursor measurement includes Voltage Measurement and Time Measurement
at normal model, shown as Fig.5-45.
Fig.5-45 CURS MEAS Menu
The description of the cursor measurement menu is shown as the following table:
Function Menu Setting Description
Type
OFF
Voltage
Time
The cursor is off, no measurement taking.
Turn on horizontal cursors and display their voltage value.
Turn on vertical cursors and display their time value.
Source
CH1,
CH2
Source signal for cursor measurement.