OWON MSO Series - Manual (Page 65)

60
Fig.5-47 Wave Form of Cursor Measurement
The Cursor Measurement for FFT model:
Press the CURSOR button to display the cursor measurement function menu (CURS
MEAS) in the screen, which includes Vamp Measurement and Freq Measurement at the
mode of FFT, shown as Fig.5-48.
Fig.5-48 CURS MEAS Menu
The description of the cursor measurement menu is shown as the following table:
Function Menu Setting Description
Type
OFF
Vamp
Freq
Switch off the cursor measurement.
Display the Vamp measurement cursor and menu.
Display the Freq measurement cursor and menu.
Source MATH FFT Display the channel for the cursor measure.
Delta Read the difference between cursors.
Cursor 1
Read the position of Cursor 1 (the Freq is read
with reference to the start point of
freq spectrum and
the Vamp is to the cursor F).
Cursor 2
Read the position of Cursor 2 (the Freq is read
with reference to the start point of
freq spectrum and
the Vamp is to the cursor F).