OWON MSO Series - Manual (Page 109)

104
displacement
Trigger Holdoff
range
100ns~10s
50% level
setting(typical)
Input signal frequency ≥50Hz
Edge trigger
slope Rising、Falling
Sensitivity 0.3div
Pulse trigger
Trigger condition
Positive pulse：＞、＜、＝
negative pulse：＞、＜、＝
Pulse Width
range
24ns～10s
Video Trigger
Modulation
Support standard NTSC、PAL and SECAM
broadcast systems
Line number
range
1-525 (NTSC) and 1-625 (PAL/SECAM)
Slope Trigger
Trigger condition
Positive pulse：＞、＜、＝
negative pulse：＞、＜、＝
Time setting 24ns～10s
Alternate Trigger
Trigger on CH1 Edge, Pulse, Video, Slope
Trigger on CH2 Edge, Pulse, Video, Slope
Logic analyzer
Sampling rate 20 S/s ～ 1GS/s
Input channel 16
Max Storage 4M/Channel,16K( when only sampling rate is 250MS/s，
500 MS/s，1GS/s)
Measurement bandwidth
100MHz---- MSO7062TD,MSO7102TD,MSO8102T
200MHz---- MSO8202T
Input impedance 660K
Ω ±5%// 15±5pF
Threshold level -6V～6V
Input signal range -30V～30V
Trigger position setting Pre-trigger, mid-trigger, re-trigger
Trigger Mode
Edge trigger, Bus trigger, Pattern trigger, Sequential
queue data ,Distributed queue trigger, Data width queue
trigger
Data Search Support