OWON MSO Series User Manual
Page 50
45
Alternate trigger(Trigger Type:
Pulse) menu list
MENU
SETTING
INSTRUCTION
Source
CH1
CH2
Channel 1 as the trigger source.
Channel 2 as the trigger source.
Mode
Pulse
when
(+pulse width less than )
(+pulse width more than )
(+Pulse width equal to)
(-Pulse width less than)
(-Pulse width more than)
(-Pulse width equal to)
To select pulse width condition
settings
24ns~10s
Turn "TRIG LEVEL" knob to set time
Coupling
AC
DC
HF
LF
Block the direct current component.
Unblock all components.
Block the high-frequency signal and only
unblock the low-frequency component.
Block the low-frequency signal and only
unblock the high -frequency component.
Holdoff
100ns～10s
Set interval by using TRIG LEVEL
control, value range from 100ns～10s.
Holdoff
Reset
Reset hold time to default value (100ns).
Alternate trigger(Trigger Mode: Slope )
Alternate trigger(Trigger Type:
Slope
)Menu is shown as Fig.5-26.
Fig.5-26
Alternate trigger(Trigger Type:
Slope
)Menu
Alternate trigger(Trigger Type:
Slope
) menu list:
MENU
SETTING INSTRUCTION
Source
CH1
CH2
S
elect CH1 as the trigger source.
Select CH2 as the trigger source.
Mode
Slope
Slope
Rising Edge and more than.