OWON MSO Series - Manual (Page 90)

85
display setting, threshold setting and trigger setting. And it is possible to save 10 groups of
settings. Waveform storage and setting storage menu display as
Fig.5-73 .
Fig.5-73 .：Storage menu
Storage menu instruction as below:
Function Setting Instruction
Memory
SEL
Waveform
Setups
Waveform for storage or recall
Setups for storage or recall
Memory
ID
Waveform0～Waveform3
Setups 0～Setups 9
Storage 4 groups of waveform
Storage 10 groups of setups
Save Save current waveform/setting in designated
No.
Recall Recall waveform/ setups in designated No.
For example, to set "WAVE 0" in memory ID to save current waveform and "setting
0" to save current setting. Follow up below steps:
1. Press "C(SAVE/REL)" after data acquisition finished and storage menu appears
2. Press "F1" till storage display as "Waveform"
3. Press "F2" till memory ID. Display as "Waveform 0"
4. Press "F3" to save current display waveform. Info window will show "Waveform
saving" then show as "Waveform saved successfully" when storage finished.
5. Press "F1" till memory SEL as "Setups"
6. Press "F2" till memory ID. display as "Setups 0"
7. Press "F3" to save current various settings. Info window show "Setting saved
successfully".
8. Press "F4" to recall the memory waveform or settings (refer to Fig.5-7 4)