NavCom SF-2040 Rev.C - Manual (Page 93)

LAND-PAK™ User Guide – Rev. C
5-89
Chapter 5 ......SurvCE Software Operation
This chapter provides an introduction to the basic
operation of the LAND-PAK using Carlson SurvCE
Software on the Explorer 600+ data collector. After
the system is set up as described in Chapter 4
Function Test Setup, follow the Getting Started
section which follows to initialize the system and
begin collecting measured positions in three
dimensions.
The settings in this chapter are suggested for a
typic
t
he
e
ct
o the
Fil
urvCE creates a number of files for supporting a
roject in the field. Two primary files are created to
manage each project. The coordinate file appended
with .crd contains the measured or computed
coordinates for the job, and the raw data file
appended with .rw5 contains the survey
measurement details.
al RTK survey, in which:
9
The base receiver is setup on an unknown poin
9
A navigation position in WGS84 is assigned to t
base point to support real time positioning in th
satellite coordinate system
A coordinate syst
9
em is established for the proje
by assigning an assumed grid coordinate t
base point
Refer to the supplied Carlson SurvCE
manual for additional inform
‡
ation.
Overview
e Types
S
p