NavCom SF-2040 Rev.C - Manual (Page 111)

LAND-PAK™ User Guide – Rev. C
5-107
18. Save the job. If desired
save the position in a re
, select the option to also
ference file (*.ref). The
reference file will be available for recall on
subsequent surveys.
‡
Refer to Appendix B, Additional Base
Position Options, for additional options
to select when assigning a base
position.
Verify GPS Base Setup
Verify the base setup. From the main menu,
EQUIP > GPS Utilities. On the
s a
to
mplete.
20.
Appendix D Static Data Collection provides
instructions for static data collection, which involves
two basic steps:
9
Collect static observations for post-processing to
compute a static network tie. For example, this
might involve computing a position from CORS
using the NGS OPUS process.
Download a static data file after the desired
d collection period.
c e the user
n AND-PAK.
19.
select
that
re i
prob fer
the supplied Carlson Explorer 600+ user manual
for further information.
submenu
opens, tap the Check RTK button. If the
lem, an error message is displayed. Re
The GPS Base Setup for RTK Surveys is co
Continue to the next section.
Static Data Collection
9
elapse
1.
Collect Static Data section of Appendix D.
Do not download a static data file. The base GPS
Collect static data. Perform the steps in the
re eiver will collect and store data whil
co tinues with this initial setup of the L