NavCom SF-2040 Rev.C - Manual (Page 8)

LAND-PAK™ User Guide – Rev. C
List of Figures
Figure 1: SF-2040, Viewed From Bottom ................ 22
Figure 2: Radio Modem LED Indicators .................. 23
Figure 3: Carlson Explorer 600+ User Interface ...... 26
Figure 4: The LAND-PAK Interfacing ...................... 31
Figure 5a: Base Transit Case Supplied Equipment. 36
Figure 5b: Base Transit Case Supplied Equipment. 37
Figure 6: Base Bag Supplied Equipment................. 38
Figure 7a: Rover Transit Case Supplied Equipment 39
Figure 7b: Rover Transit Case Supplied Equipment 40
Figure 8: Rover Bag Supplied Equipment ............... 41
Figure 9: Office Supplies Transit Case.................... 42
Figure 10: Battery Locking Clips.............................. 47
Figure 11: NavCom Base Cable.............................. 50
Figure 12: AC/DC Adapter Input Plug ..................... 55
Figure 13: Battery Charger/Charging Cable ............ 55
Figure 14: Explorer 600+ Charger Connection........ 56
Figure 15: CHG LED ............................................... 56
Figure 16: Radio Modem Soft Keys......................... 61
Figure 17: LCD Display – Data Transfer Mode ....... 62
Figure 18: LCD Display – Programming Mode........ 62
Figure 19: Data Transfer Mode ............................... 64
Figure 20: Active Channel ....................................... 65
Figure 21: Next Digit................................................ 65
Figure 22: Set Frequency ........................................ 66
Figure 23: Main Menu – Radio Settings .................. 67
Figure 24: TX level option........................................ 67
Figure 25: RF Power Output Settings...................... 67
Figure 26: Main Menu – Radio Settings .................. 68
Figure 27: Sig. Threshold option ............................. 68
Figure 28: Main Menu – Port 1 Setting.................... 69
Figure 29: Baud Rate Setting .................................. 70
Figure 30: Baud Rate Setting Change..................... 70
Figure 31: Main Menu – Additional Setting.............. 72
Figure 32: Error Correction and Error Checking...... 72
Figure 33: SL-Commands and Priority .................... 73
Figure 34: Save Changes........................................ 73
iv