beautypg.com

Figure 38: mounting the radio antenna bracket – NavCom SF-2040 Rev.C User Manual

Page 81

background image

LAND-PAK™ User Guide – Rev. C

4-77

‡

OPTIONAL STEP: Screw the pole
extension into the tribrach adapter. The
pole extension provides easier access to
the connectors and exchange of the
batteries on the SF-2040 GIS PM Sensor.
The pole extension is in the base bag.

Figure 38: Mounting the Radio Antenna Bracket

Refer to Figure 38 for the steps below:

8. Mount the radio antenna bracket to the tripod:

a. Unscrew the rear knob of the bracket and

remove the rear plate.

b. Place the bracket against the opening on a

tripod leg.

‡

Do not mount the bracket to the tripod
leg on which the shoulder strap is
attached.

c. At the back of the tripod leg, place the rear

plate through the bracket screw.