beautypg.com

Figure 75: gps rover submenu – receiver tab . 110 – NavCom SF-2040 Rev.C User Manual

Page 114

background image

LAND-PAK™ User Guide – Rev. C

5-110

Ref

7.

er to Figure 75 for the steps below:

Tap

the

Receiver tab.

Figure 75: GPS Rover Submenu – Receiver Tab

S

8.

t

‡

If preferred, create a USER antenna
type so that the slant height
measurement can be taken at the
bottom outside edge of the battery
casing on the SF-2040 which is
coincidental with the Antenna
Reference point (ARP) per the NGS
Antenna Model. Refer to the GPS
Base Setup
section above for
instructions on how to create a USER

ntenna.

‡

If working in feet, the height can be
verified. Tap the Antenna Height field.
Enter the height in meters, for

e the options:

Antenna Type: [NAVCOMSF2040G]

a

current job units, and select Slant. Take the
slant height measurement at the center of the
black ring around the top of the receiver.

Antenna Height: Enter the height in the