NavCom SF-2040 Rev.C - Manual (Page 141)

LAND-PAK™ User Guide – Rev. C
6-137
update the coordinates, if necessary, in an existing or
new .crd file.
Although this is intended primarily for a convention
instrument, X-Port provides the ability to edit into t
.rw5 file additional offset measurements (bearings
and distances) obtained during the GPS survey for
processing sideshots from RTK points.
‡
Refer to the Carlson X-Port manual for
al
he
the file formats supported by the raw
data and the coordinate data editors.
seful for converting, transferring, and
printing reports are demonstrated in the following
File
contain ew and
the Explorer 600+ for use in the field as
on the PC. The raw data and the
Commands u
exercises.
Exercises
„ Exercise 1: Import/Convert Text File to CRD
This exercise provides steps to import a text file
ing coordinates into X-Port for revi
o a *.crd file. The *.crd file can be conversion t
transferred to
a “Control File”. The file could contain coordinates of
control points intended for a base station, for a
transformation to a local coordinate system, or for
points to be staked in the field.
1. Run X-Port
coordinate data editors are blank at start-up.
2. Select Tools > Import Point Data > Text/ASCII
File. The Import Point Data window opens (see
Figure 104).