NavCom SF-2040 Rev.C - Manual (Page 148)

LAND-PAK™ User Guide – Rev. C
6-144
„ Exercise 5: Process GPS From RW5 File
This exercise provides steps to process GPS for
ad itional details, geodetic and grid coordinates,
geoid heights, rod height
d
s, etc. from the *.rw5 file.
1.
2.
Thi
GP
‡
Add Menu
Adding records to a *.rw5 file is most useful when
there are some additional conventional field traverse,
IMPORTANT: The output from
Process (Compute Points) > GPS
contains the grid coordinates and
elevations on the points. However, the
latitude, longitude and ellipsoid
heights are at the L1 phase center.
The Rod Height is from the point to
the L1 phase center.
Transfer a *.rw5 file from the Explorer 600+ to the
PC.
n X-Port on the PC.
Process (Compute Points) > GPS
Ru
3. Select
Process Options window open
. The
s.
Set the necessary parameters. 4.
5. Click OK.
6. Print and/or save the results.
Menus & Commands
s se nds specific to
S.
Refer to the Carlson X-Port manual for
ction describes X-Port comma
information on menus and commands
not described in this section.