NavCom SF-2040 Rev.C - Manual (Page 58)

LAND-PAK™ User Guide – Rev. C
Carlson Explorer 600+ Battery Pack
This section provides steps to:
9
Charge the battery pack for the Carlson Explorer
600+ data collector.
9
Boot up Windows CE to verify functionality and to
verify Carlson SurvCE software is installed.
A 7.2V 2500mAh NiMH battery pack powers the
Carlson Explorer 600+. It can provide approximately 8
to 12 hours of operating time on a full charge
(depending on power management and use).
There is no charging indicator on the Explorer 600+
battery charger. The CHG LED on the Explorer 600+
front panel indicates battery charging status.
Charge the battery pack only with the
supplied battery charger kit (P/N 59-
810001-3001); otherwise, damage to
the battery pack could occur.
‡
For optimum battery performance,
refer to the supplied Carlson Explorer
600+ user manual, Power
Recommendations section.
‡
A vehicle charger (P/N 59-800004-
0001) for the Explorer 600+ is
supplied for use in the field.
‡
If the battery pack is lost, six AA
batteries can provide power to the
Explorer 600+ for approximately 2 to 3
hours. If TruBlu™ wireless is being
used, battery life is less.
4-54