Figure 121: trublu baud rate setting – NavCom SF-2040 Rev.C User Manual
Page 172
LAND-PAK™ User Guide – Rev. C
C-168
5. Tap
the
Continue Last Job button or the Select
New/Existing Job button.
• If
the
Continue Last Job button is tapped, a
connection is established. If the Select
New/Existing Job button is tapped, the
Coordinate Files window opens. For
instructions on setting up a new job, refer to
the Create A New Job
• section in Chapter 5 SurvCE Software
Operation.
6. Select
is
Equip > GPS Rover. A connection
established. The GPS Rover window opens.
7. Tap
the
Comms tab.
8. In
the
Baud drop-down list, select 19200 (see
Figure 121).
Figure 121: TruBlu Baud Rate Setting
9. Tap to accept the setting and connect to the
GPS sensor. A connection is established.
10. Remove the serial cable from the SF-2040 GPS
sensor and the Explorer 600+. Do not exit SurvCE
on the Explorer 600+.
11. Insert TruBlu in COM1 of the SF-2040. The red
lue.
dot on TruBlu must face up. TruBlu blinks b
- SF-3050 Logging Data to Internal Memory SurvCE (4 pages)
- SF-3040 Logging Data to Internal Memory or SD Card (6 pages)
- SF-3050 Logging Data to USB Using SurvCE (4 pages)
- StarFire over IP (5 pages)
- SF-3050 Quick Start (4 pages)
- SF-3050 A Computationally Efficient Ambiguity Resolution (7 pages)
- StarFire (5 pages)
- StarFire to SW v3.0.12.0 (3 pages)
- SF-3050 Rev.I (196 pages)
- StarUtil-3000 Rev.G (177 pages)
- Sapphire Rev.L (450 pages)
- StarUtil-3000 Rev.A (119 pages)
- SF-3050 Rev.A (169 pages)
- SF-3050 Rev.B (201 pages)
- SF-3050 Rev.D (235 pages)
- Rinex Utility Rev.D (17 pages)
- SF-3040 Quick Start (4 pages)
- SF-3040 Rev.F (217 pages)
- SurveCE Integration Rev.A (150 pages)
- Install Utility Rev.C (26 pages)
- LAND-PAK Quick Start Rev.B (7 pages)
- LAND-PAK Rev.E (156 pages)
- StarUtil Rev.C (58 pages)
- LAND-PAK Rev.N (194 pages)
- StarUtil Rev.B (8 pages)
- StarUtil Rev.F (134 pages)
- SF-2040 Rev.E (63 pages)
- RT-3010 Rev.E (61 pages)
- StarFire Satellite Change Rev.G (24 pages)
- StarFire Satellite Change Rev.I (23 pages)
- TS Collecting Receiver (2 pages)
- TS Factory Default (2 pages)
- LAND-PAK Rev.F (159 pages)
- SF-2040 Rev.F (93 pages)
- RT-3020 Rev.F (93 pages)
- SF-2110 Quick Start Rev.A (2 pages)
- StarPac Rev.A (15 pages)
- StarControl Rev.C (56 pages)
- SF-2050 Rev.F (99 pages)
- TruBlu Rev.A (2 pages)
- VueStar Rev.B (13 pages)
- SF-2110 Rev.B (99 pages)
- StarUtil-2110 Rev.A (85 pages)
- RT-3010 Rev.F (89 pages)