Figure 104: import point data window – NavCom SF-2040 Rev.C User Manual
Page 142
LAND-PAK™ User Guide – Rev. C
6-138
Figure 104: Import Point Data Window
3. Click
the
Select Text File button and browse to
and select the desired file. The Import Point Data
a
d.
on.
alf of
File > Save CRD
as. Browse to a location. Save and name the file.
Exercise 2: PC/Explorer File Transfer
This exercise provides steps to transfer file
PC to the Explorer 600+. The transferred file may be
the .crd file created in Exercise 1 above or an
ASCII/text file.
1. Run X-Port on the PC.
2. Connect the Explorer 600+ to the PC with the
supplied USB cable (in the rover transit case).
3. On the
window returns.
4. In
the
Common Formats drop-down list, select
format. It appears in the Coordinate Order fiel
5. Preview the file. If acceptable, click the OK butt
The imported points are listed in the lower h
X-Port.
6. In the X-Port menu bar, select
s from the
Explorer 600+, run SurvCE.
4. In
SurvCE,
select
File > Data Transfer. The Data
Transfer window opens (see Figure 105).
- SF-3050 Logging Data to Internal Memory SurvCE (4 pages)
- SF-3040 Logging Data to Internal Memory or SD Card (6 pages)
- SF-3050 Logging Data to USB Using SurvCE (4 pages)
- StarFire over IP (5 pages)
- SF-3050 Quick Start (4 pages)
- SF-3050 A Computationally Efficient Ambiguity Resolution (7 pages)
- StarFire (5 pages)
- StarFire to SW v3.0.12.0 (3 pages)
- SF-3050 Rev.I (196 pages)
- StarUtil-3000 Rev.G (177 pages)
- Sapphire Rev.L (450 pages)
- StarUtil-3000 Rev.A (119 pages)
- SF-3050 Rev.A (169 pages)
- SF-3050 Rev.B (201 pages)
- SF-3050 Rev.D (235 pages)
- Rinex Utility Rev.D (17 pages)
- SF-3040 Quick Start (4 pages)
- SF-3040 Rev.F (217 pages)
- SurveCE Integration Rev.A (150 pages)
- Install Utility Rev.C (26 pages)
- LAND-PAK Quick Start Rev.B (7 pages)
- LAND-PAK Rev.E (156 pages)
- StarUtil Rev.C (58 pages)
- LAND-PAK Rev.N (194 pages)
- StarUtil Rev.B (8 pages)
- StarUtil Rev.F (134 pages)
- SF-2040 Rev.E (63 pages)
- RT-3010 Rev.E (61 pages)
- StarFire Satellite Change Rev.G (24 pages)
- StarFire Satellite Change Rev.I (23 pages)
- TS Collecting Receiver (2 pages)
- TS Factory Default (2 pages)
- LAND-PAK Rev.F (159 pages)
- SF-2040 Rev.F (93 pages)
- RT-3020 Rev.F (93 pages)
- SF-2110 Quick Start Rev.A (2 pages)
- StarPac Rev.A (15 pages)
- StarControl Rev.C (56 pages)
- SF-2050 Rev.F (99 pages)
- TruBlu Rev.A (2 pages)
- VueStar Rev.B (13 pages)
- SF-2110 Rev.B (99 pages)
- StarUtil-2110 Rev.A (85 pages)
- RT-3010 Rev.F (89 pages)