Measurement Computing Digital488/80A - Manual (Page 88)

Software Setup
Refer to the Configure (C) command in Chapter 6: Digital488/80A Commands.
Channel 0
Configuration Command Port 5 Port 4 Port 3 Port 2 Port 1
U C0 Input Input Input Input Input
U C1 Input Input Input Input Output
U C2 Input Input Input Output Output
U C3 Input Input Output Output Output
U C4 Input Output Output Output Output
U C5 Output Output Output Output Output
Channel 1
Configuration Command Port 5 Port 4 Port 3 Port 2 Port 1
U C0 Input Input Input Input Input
U C1 Input Input Input Input Output
U C2 Input Input Input Output Output
U C3 Input Input Output Output Output
U C4 Input Output Output Output Output
U C5 Output Output Output Output Output
CAUTION
The hardware and software configurations for the input and output ports must agree.
The Digital488/80A unit is protected from configuration conflict, but the I/O lines will
not respond properly.
82 Appendix A Digital488/80A User's Manual