Measurement Computing Digital488/80A - Manual (Page 3)

Introduction to this Manual
This manual covers the setup and operation of the Digital488/80A 80-bit IEEE 488 / Digital I/O interface
system. This manual is organized as follows:
• Chapter 1 - Digital488/80A Overview gives an overview of the basic features of a Digital488/80A
system. Digital488/80A accessories and specifications are also provided.
• Chapter 2 - Digital488/80A Setup explains in detail the various hardware features of the
Digital488/80A unit.
• Chapter 3 - Digital488/80A Power & Assembly provides detailed instructions on line-voltage
selection and fuse replacement, rack-mount and bench-top installation, as well as power-up activation.
• Chapter 4 - Digital488/80A Operation explains the Digital488/80A internal operation. Descriptions
of the handshaking/control lines, as well as IEEE 488 bus support, are provided.
• Chapter 5 - IEEE 488 Background describes the history and the basic concepts of IEEE 488
operation, including the various IEEE 488 bus lines and bus commands.
• Chapter 6 - Digital488/80A Commands discusses the entire command set covering the
Digital488/80A unit. The command syntax, groups, and reference are provided. The description
format of the individual commands includes the command type, syntax, description, and an example
program excerpt.
• Chapter 7 - Troubleshooting provides a reference for possible solutions to technical problems. Before
calling for technical assistance, refer to this chapter.
• Appendix A provides the Digital488/80A HVCX1 Configuration Record for recording hardware and
software settings, and recording DB-50 connector wiring information.
• Appendix B provides background information concerning the IEEE 488 bus, the serial bus, and ASCII
controls.
• The Index provides a comprehensive alphabetical listing of the main terms and topics in this manual.
Also, the Abbreviations on the last pages of this manual, provides an overall list of abbreviations,
including acronyms and ASCII control codes, as an additional reference for this manual and for other
related literature.
CAUTION
Using this equipment in ways other than described in this manual can cause personal
injury or equipment damage. Before setting up and using your equipment, you should
read all documentation that covers your system. Pay special attention to cautions and
warnings formatted like this one.
Digital488/80A User’s Manual i