Measurement Computing Digital488/80A - Manual (Page 69)

O - Recall Configuration
SYNTAX Oval Load configuration val , where val = value from 0 to 100 .
O? Returns currently loaded configuration val .
DESCRIPTION
The Recall Configuration (
O ) command is used to load a previously-saved configuration from Non-Volatile RAM and
use it as the present configuration. The argument of the command val may range from 0 to 100 . Configuration 0 is
the power-up configuration. Any load of a configuration not previously-saved with the Save Configuration ( S )
command, configures the channel with the default setting for each command (i.e. Data Format F0 , Bus Terminator Y0 ,
etc.) Issuing an O? query command returns the configuration number last recalled.
EXAMPLE
PRINT#1,"CLEAR08" Line 1: Reset the Digital488/80A..
PRINT#1,"OUTPUT08;O5X" Line 2: Load Configuration 5 from Non-Volatile RAM for use as
the present configuration.
Digital488/80A User’s Manual 967695 Digital488/80A Commands 63