Caution – Measurement Computing Digital488/80A User Manual

Page 58

Text mode
Original mode

CAUTION

Because the Configuration (C) command is used, the following programming
example(s) will not work properly if the HVCX1 option is installed with a conflicting
hardware configuration. To be safe, remove the HVCX1 board and replace it with the
jumper board to run the example(s).

EXAMPLE 5: Command Conflict Error.

PRINT#1,"OUTPUT08;G0C5P1X"

Line 1: Configure all 5 ports as outputs; select Port 1 only.

PRINT#1,"OUTPUT08;D123456ZX"

Line 2: Send too much data for one port.

PRINT#1,"OUTPUT08;E?"

Line 3: Query the error status (ERROR LED should be on).

PRINT#1,"ENTER08",

INPUT#2,A$,

PRINT A$

Line 6: Display shows:

E3-Conflict Error

(ERROR LED should

be off).

52 Digital488/80A Commands

967695

Digital488/80A User's Manual