Rack-mount & bench-top assembly, Ount & bench-top assembly…… 23, Rack mount…… 23 – Measurement Computing Digital488/80A User Manual

Page 29: Op…… 23, Rack mount, Bench top

Text mode
Original mode

Rack-Mount & Bench-Top Assembly

The Digital488/80A includes accessories for rack-mount or bench-top assembly.

Rack Mount

If rack-mount assembly is required, remove the two plastic screws from the pre-drilled holes on each side
of the unit. Since the unit can be mounted with the front or rear panel facing the front of the rack fixture,
remove only those screws from the set of holes that will be toward the front of the rack. Attach the two
rack ears using the enclosed screws.

Bench Top

If bench-top assembly is required, install the self-adhesive rubber feet on the bottom of the unit
approximately one inch from each corner.

Digital488/80A User’s Manual

Digital488/80A Power & Assembly 23