beautypg.com

Measurement Computing Digital488/80A User Manual

Page 21

background image

Note:

All of the components mentioned below are for the upper-corner sections of the HVCX1
board labelled CONTROL.

1. Locate the upper corners of the HVCX1 board labelled CH1 CONTROL and CH0 CONTROL.

2. In these CH1 CONTROL and CH0 CONTROL sections, the handshaking outputs are set by jumpers

JP1 and JP2, for either +5 VDC (TTL) or a user-defined voltage (see following figure for the proper
jumper settings).

Digital488/80A User’s Manual

11-08-02

Digital488/80A Setup 15

See also other documents in the category Measurement Computing Hardware: