Kanguru 4HD SATA - Manual (Page 50)

50
3.4.16 HD Info
The HD Info button allows you to see the following information regarding the hard drive: SEQ, LV,
TYPE, OFFLOC, SIZE and ABSLOC. These values are for troubleshooting purposes and cannot be
configured.
DIAGNOSTIC
TOOL
CONFIGURATION ->
<- Back UP/DN Sel ->
Trans BLK: Auto
Btn. Snd: ENABLE
HD Info ->
<- Back UP/DN Sel ->
-> 0 L0 T0C LOC800750
<- Back UP/DN Sel ->
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to CONFIGURATION mode. Press the RIGHT
button to enter CONFIGURATION mode.
2. From the CONFIGURATION Function Menu, press the UP
or DOWN buttons to navigate to the HD INFO function.
Press the RIGHT button to enter the HD INFO menu.
3. From the HD INFO menu, press the RIGHT button to select
the Master hard drive. If the LCD screen displays “No M”,
then there is no Master hard drive connected.
4. Use the UP or DOWN buttons to view the information
regarding the Master hard drive. Press the LEFT button to
return to the HD INFO menu.
-> SEQ: 0
LV: 0
TYPE: 07 NTFS
<- Back UP/DN Sel ->
HD Info