Kanguru 4HD SATA - Manual (Page 19)

19
3.1.7 Brief Compare
The Brief Compare function only compares the sectors with information and skips the blank sectors
to assure that all of the Target drives have the same information as the Master drive. Brief Compare
can be used in conjunction with the Brief Copy function.
Note: Compare functions can only be used when the UDMA transfer mode is disabled. To disable
the UDMA you have to enter the CONFIGURATION mode, select TRAN MODE and then define
the Transfer Mode as “UDMA0”. For more information on Transfer Mode, please see section 3.4.2
Tran Mode, p.35.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] RATIO COPY
[ ] DISK COMPARE
[ ] BRIEF COMPARE ->
<- Back UP/DN Sel ->
X
[COPY]
BRIEF COMPARE
Run by ‘>’
1. Leave all drives in place after a Brief Copy session has
completed.
2. From the Setup Menu, press the UP or DOWN buttons to
navigate to COPY mode. Press the RIGHT button to enter
COPY mode.
3. From the COPY Function Menu, press the UP or DOWN
buttons to navigate to the BRIEF COMPARE function. Press
the RIGHT button to select BRIEF COMPARE.
4. Press the LEFT arrow twice to return to the Main Menu.
5. Press the RIGHT button to begin the Brief Compare.
6. Once the KanguruClone has finished comparing, it will
display a “V” for verified target drives or an “X” for failed
drives.
Brief Compare