Kanguru 4HD SATA - Manual (Page 27)

27
3.3.2 Scan Disk
The Scan Disk Function quickly checks for any bad sectors on the target hard drives.
COPY
DIAGNOSTIC
TOOL ->
<- Back UP/DN Sel ->
[ ] FULL ERASE
[ ] SCAN DISK
[ ] QUICK ERASE
->
<- Back UP/DN Sel ->
X
[TOOL]
SCAN DISK
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to TOOL mode. Press the RIGHT button to enter
TOOL mode.
2. From the TOOL Function Menu, press the UP or DOWN
buttons to navigate to the SCAN DISK function. Press the
RIGHT button to select SCAN DISK.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Scan Disk.
5. Once the KanguruClone has finished scanning the drive, it
will display a “V” for verified target drives or an “X” for
failed drives.
Scan Disk