Kanguru 4HD SATA - Manual (Page 30)

30
3.3.5 Max Perform
The Maximize Performance function will set the spin speed of the hard drives to the highest setting to
increase the rotation rate and making the hard drive work at the highest performance rate.
Note: It is NOT recommended to use this function. The Maximize Performance function will increase
the level of noise the hard drives make. Once executed, you may not be able to reverse this action.
COPY
DIAGNOSTIC
TOOL ->
<- Back UP/DN Sel ->
[ ] QUICK ERASE
[ ] MIN ACOUSTIC
[ ] MAX PERFORM ->
<- Back UP/DN Sel ->
X
[TOOL]
MAX PERFORM
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to TOOL mode. Press the RIGHT button to enter
TOOL mode.
2. From the TOOL Function Menu, press the UP or DOWN
buttons to navigate to the MAX PERFORM function. Press
the RIGHT button to select MAX PERFORM.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Maximize Performance
function.
5. Once the KanguruClone has finished running Maximize
Performance on your drives, it will display a “V” for verified
target drives or an “X” for failed drives.
Max Perform