Kanguru 4HD SATA - Manual (Page 35)

35
3.4.2 Tran Mode
The Transfer Mode function allows you to configure the data transfer mode. The transfer modes are:
Auto, UDMA5 - UDMA0, PIO4 - PIO0. The default value is Auto.
DIAGNOSTIC
TOOL
CONFIGURATION ->
<- Back UP/DN Sel ->
HD MODE: AUTO
TRAN MODE: AUTO
PWN ON MODE: BOOST
->
<- Back UP/DN Sel ->
( ) AUTO
( ) UDMA5
( ) UDMA4
->
<- Back UP/DN Sel ->
*
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to CONFIGURATION mode. Press the RIGHT
button to enter CONFIGURATION mode.
2. From the CONFIGURATION Function Menu, press the UP
or DOWN buttons to navigate to the TRAN MODE function.
Press the RIGHT button to enter the TRAN MODE Setup
Menu.
3. From the TRAN MODE Setup Menu, press the UP or DOWN
buttons to navigate the different modes. Press the RIGHT
button to select a Transfer Mode.
Tran Mode