Kanguru KCLONE-LIGHT - Manual

Light Tower Indicator
Model no: KCLONE-LIGHT
Quick Start Guide
03.30.11 v1.0 © 2011 Kanguru Solutions
Legal terms and conditions available at www.kanguru.com.
Please review and agree before use. Thank you.
Introduction
Thank you for purchasing the Kanguru Clone Light Tower
Indicator. The Kanguru Clone Tower Light Indicator is an
omnidirectional light indicator that allows you to easily view
the status of your Kanguru Clone hard drive duplicator from a
distance. For use with Kanguru Clone Hard Drive Duplicator
models KCLONE-5HD-SATA and KCLONE-14HD-SATA.
Package Contents
If any of the following items are missing, please contact
Kanguru Solutions Technical Support at 508-376-4245 ext.2
and your replacement parts will be shipped to you immediately.
• 1x Light Tower Indicator with mounting bracket
• 4x Mounting screws
• 1x Quick Start Guide
Assembly
To attach your Light Tower Indicator to your Kanguru Clone
hard drive duplicator:
1. Unscrew the hexagonal nut located at the bottom of
the Light Tower until it is released. Slide the mounting
bracket half-way down the cable.
2. Attach the mounting bracket to the back of the Kanguru
Clone’s case using the provided mounting screws.
3. Screw the hexagon nut back onto the bottom of the Light
Tower.
4. Connect the Light Tower cable to the top port on the back
of your duplicator. The Light Tower cable will only fit one
of the ports.
Congratulations! Your Light Tower is now mounted. While a
duplication is in progress the Light Tower will blink green to
indicate that it is working. When the duplication process has
completed the Light Tower will show either a solid green or
solid red light signifying a successful duplication or a failed
duplication.