Kanguru 4HD SATA - Manual (Page 33)

33
3.3.8 Port Test
The Port Test function will scan each port and verify that the Master and Target drives are connected
and can be accessed. Failed ports are usually the result of one of the following: faulty HD, loose
connection or faulty port.
COPY
DIAGNOSTIC
TOOL ->
<- Back UP/DN Sel ->
[ ] HDD WIPE
[ ] CHECKSUM
[ ] PORT TEST ->
<- Back UP/DN Sel ->
X
[TOOL]
PORT TEST
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to TOOL mode. Press the RIGHT button to enter
TOOL mode.
2. From the TOOL Function Menu, press the UP or DOWN
buttons to navigate to the PORT TEST function. Press the
RIGHT button to select HDD PORT TEST.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Port Test.
5. Once the KanguruClone has finished testing the drives, it
will display a “V” for verified target drives or an “X” for
failed drives.
Port Test