Kanguru 4HD SATA - Manual (Page 12)

12
3. Using Your KanguruClone
Before you begin any function, connect all Master and Target hard drives. All PATA hard drives must
have their jumpers set to either MASTER or CABLE SELECT.
The KanguruClone has 4 main modes: COPY, DIAGNOSTIC, TOOL and CONFIGURATION. You
can navigate between these modes from the Setup Menu by pressing the UP / DOWN buttons. When
you have reached the desired mode, press the RIGHT button to enter that mode.
3.1 Copy Functions
The KanguruClone can clone hard drives in one of 5 ways: Disk Copy, Brief Copy, Resize Copy, Area
Copy and Ratio Copy.
After duplication has been completed you have 4 options for verifying that all of the Target hard
drives match the Master: Disk Compare, Brief Compare, Area Compare and Ratio Compare.
Note: Compare functions can be used in conjunction with the Copy functions to achieve an all in one
Copy and Compare function. To do so, simply select a Copy function and a Compare function at the
same time.
Using Your KanguruClone / Copy Functions