Kanguru 4HD SATA - Manual (Page 15)

15
3.1.3. Resize Copy
The Resize Copy function is used to clone Master and Target drives with different capacities. This
mode only copies the sectors with information and skips the blank sectors. This mode is faster than
Disk Copy, but slower than Brief copy because it needs extra time to calculate the capacity difference
between the Master and Target drives.
Note: You can only copy from a smaller capacity Master drive to larger capacity Target drives. Target
drives in a session must all have the same capacity (e.g. a 40GB Master drive and 60GB Target
drives.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] DISK COPY
[ ] BRIEF COPY
[ ] RESIZE COPY ->
<- Back UP/DN Sel ->
X
[COPY]
RESIZE COPY
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to COPY mode. Press the RIGHT button to enter
COPY mode.
2. From the COPY Function Menu, press the UP or DOWN
buttons to navigate to the RESIZE COPY function. Press the
RIGHT button to select RESIZE COPY.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Resize Copy.
5. Once the KanguruClone has finished cloning, it will display
a “V” for verified target drives or an “X” for failed drives.
Note: Linux file systems are not supported by the Resize Copy function.
Resize Copy