Kanguru 4HD SATA - Manual (Page 14)

14
3.1.2 Brief Copy
The Brief Copy function clones only sectors with data and will skip the blank sectors (including data
hidden in sub channels). This mode is the fastest but will only support the following file systems:
FAT, FAT16, FAT32, NTFS, HFS, EXT1, EXT2, EXT3.
Note: When performing a Brief Copy, Kanguru Solutions recommends using Master and the Target
disks of the same capacity. If you want to clone a Master hard drive to Targets of a different capacity,
please use the Resize Copy function. For more information on Resize Copy, please see section 3.1.3
Resize Copy, p.15.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] DISK COPY
[ ] BRIEF COPY
[ ] RESIZE COPY
->
<- Back UP/DN Sel ->
X
[COPY]
BRIEF COPY
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to COPY mode. Press the RIGHT button to enter
COPY mode.
2. From the COPY Function Menu, press the UP or DOWN
buttons to navigate to the BRIEF COPY function. Press the
RIGHT button to select BRIEF COPY.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Brief Copy.
5. Once the KanguruClone has finished cloning, it will display
a “V” for verified target drives or an “X” for failed drives.
Brief Copy