Ivoclar Vivadent SR Adoro - Manual (Page 8)

8
The Product System
Compatibility with Ivoclar Vivadent equipment
the high-performance Lumamat ® 100 light furnace was especially
developed for the fabrication of high-quality composite restorations.
the object holder of the furnace ensures that the sR Adoro restora-
tions are appropriately positioned for optimum polymerization/
tempering so that they can develop their physical properties to the
full. the sensor-controlled Quick can be used for fast precuring
processes. it can also be used for the intermediate polymerization of
other light-curing veneering materials.
Compatibility with Ivoclar Vivadent alloys
All metal-supported restorations involve the veneering of a pre-
viously fabricated metal framework. ivoclar Vivadent offers customers
a wide range of different high-quality alloys, which are purpose-
designed for their specific field of application. the selection includes
high gold, reduced-gold and base metal alloys. the sR Link bonding
system provides a sound bond between the metal and composite.
if you use other alloys, please contact the corresponding manufac-
turer to make sure that the alloy used is compatible with sR Link
and its components.
Alloys
High Gold Content
Academy Gold
Harmony
® pF
Academy Gold XH
Reduced Gold
Harmony ® X-Hard
XL-X ®
maxigold ®
midigold ® 50
magenta
minigold
®
Harmony ® 3
Universal Alloys
BioUniversal pdF
Base Metal
ips d.siGN ® 30
Colado ® CC
Colado ® NC
4all
Au Pt
< 1.0
3.6
3.6
2.9
–
–
–
–
–
–
9.2
–
–
65.1
61.4
Pd
–
–
–
3.6
3.9
2.7
3.5
6.5
4.0
25.9
–
30.1
25.5
20.2
25.7
77.2
72.0
70.7
68.3
62.8
59.5
50.0
50.0
40.0
3.5
71.1
60.2
59.0
–
–
Ag
Co Ni Cr Mon
12.7
13.7
13.7
13.8
16.1
26.3
35.0
21.0
47.0
50.8
11.7
< 1.0
5.5
1.8
11.0
*The range of available alloys may vary
from country to country
Working Times
sR Adoro materials are sensitive to light. the working time depends
on the layer thickness, shading and the prevailing light conditions.
Light shades react more quickly than do dark ones. the times listed
below represent mean values at a light intensity of 3000 lux, which
corresponds to the light encountered in a well-lit working space.
Bear the maximum time limit in minds, when extruding the material
from the syringe.
2–25 min
4–25 min
SR Adoro Cervical
SR Adoro Deep Dentin
SR Adoro Dentin
SR Adoro Incisal / Transpa
SR Adoro Add-On
SR Adoro Impulse
SR Adoro Gingiva
lo
w
vi
sc
o
si
ty
h
ig
h
vi
sc
o
si
ty
SR Adoro Liner
SR Adoro Opaquer
SR Adoro Intensive Opaquer
SR Adoro Stains
SR Adoro Time
Curing Depths
Given the material's sensitivity to light, the curing depth of
sR Adoro (i.e. precuring with Quick initial light unit) depends on the
shade and, above all, the layer thickness applied. Light and translu-
cent shades cure more readily, as light can penetrate them more
easily than it does darker and more opaque shades. the curing
depths listed below represent values achieved with the Lumamat
100/targis power Upgrade with a precuring step of 20 seconds
using the Quick initial light unit. it is paramount to bear these values
in mind when layering the individual materials.
max. 0.05
0.2 – 0.8
1.0 – 2.0
SR Adoro Opaquer
SR Adoro Stains
SR Adoro Pastes (depending on the shade)
SR Adoro
Curing depth in mm
(final polymerization with prior precuring for 20 seconds with the Quick)
Values in percent (%)