Ivoclar Vivadent SR Adoro - Manual (Page 51)

51
Practical
Pr
ocedur
e
for
Fixed
Metal-Supported
Restorations
Apply SR Adoro Thermo Guard immediately before polymerization / tempering. Unnecessary drying out of the
applied paste must be prevented.
Cover exposed metal portions, such as inner aspects of crowns and palatal surfaces.
Ensure optimum wetting and smooth out SR Adoro Thermo Guard.
Place restorations with applied SR Adoro Thermo Guard on the object holder.
Version A:
Application of SR Adoro Thermo Guard
on full-coverage veneers
Version B:
Application of SR Adoro Thermo Guard
on partial veneers
Step 2 – Applying SR Adoro Thermo Guard
Once SR Gel has been applied, cover all exposed metal parts with SR Adoro Thermo Guard.
Open SR Adoro Thermo Guard syringes only immediately before use to prevent admission of air. Quickly start by filling
the internal aspects and/or basal surface of the crowns and then cover the exposed metal parts, such as scallops, occlusal
surfaces and margins, and smooth out SR Adoro Thermo Guard. Ensure homogeneous application and thorough wetting
of the metal. Prevent large amounts of SR Adoro Thermo Guard on the veneering surfaces. Close syringes immediately
after use, position the restoration on the object holder and polymerize / temper in the Lumamt 100 or Targis Power
Upgrade.