Ivoclar Vivadent SR Adoro - Manual (Page 58)

58
Shade Matching of SR Adoro to Denture Teeth
In combined denture prosthetics, matching the shade of composite veneers and denture teeth is very important. The
SR Adoro materials and the specially developed cervical materials permit efficient shade matching.
Chromascop shade guide (in conjunction with SR Antaris, SR Postaris denture teeth)
Cervical, Dentin and Incisal layering
The layering procedure of the individual SR Adoro pastes is carried out in accordance with the layering diagram for the
Chromascop shade guide. Adapt the first layer firmly (press into place) to ensure an effective bond between the composite
and the opaquer surface and precure each segment for 20 seconds using a Quick curing light.
In the cervical area, build up Deep Dentin in a half-moon shape to stabilize the shade. Create smooth and rounded
transitions between the individual layers (Deep Dentin – Dentin – Incisal) using the SR Modelling Instruments and synthetic
brushes.
After that, build up the dentin layers step by step and precure each segment for 20 seconds. Design the dentin core in
such a way that the mamelon shape remains outlined. Make sure to provide adequate space for the subsequent applica-
tion of the Incisal and Transpa materials. After that, the restoration is completed step-by-step using the corresponding
Incisal materials. Subsequently, precure each individual layer for 20 seconds per segment using the Quick curing light.
The basic working procedure (contouring, casting, finishing, framework conditioning, opaquer application,
etc.) and the removal of the inhibited layer are carried out as described on page 31 for crowns and bridges.