Ivoclar Vivadent SR Adoro User Manual

Page 67

Text mode
Original mode

Apply the Liner on the entire zirconium oxide framework.

Precure the Liner with the Quick after application.

Liner

Apparatus

Time

Program

Precuring time per
segment

Quick

20 s

–

Coat all areas with a layer of SR Adoro Liner of at least
150 microns. Thin out the Liner towards the preparation
margin.
If desired, the translucency of the Liners 050–500 may be
increased by using Liner clear or Liner incisal.

Removing the inhibition layer

Thoroughly remove the corresponding inhibition layer using
a disposable sponge (do not use a solvent); make sure that
the Liner surfaces are free of residue. Make sure that the
Liner shows a mat surface.

Remove the inhibition layer with a disposable sponge.

Practical

ocedur

for

Fixed

ZrO

-Supported

Restorations