Ivoclar Vivadent SR Adoro - Manual (Page 72)

72
Activating the ceramic surface
1. Condition the ceramic surface by blasting it with Al
2
O
3
(2 bar / 29 psi, 100 microns) or etching it with IPS Ceramic
Etching Gel. The reaction time of IPS Ceramic Etching Gel is 60 seconds.
2. Then, apply Monobond Plus and let it react for 60 seconds.
3. Apply Heliobond in a thin layer immediately after that, disperse with compressed air, and cure for 60 seconds with the
Quick.
Application of Monobond Plus and Heliobond.
Note: Blast or etch only those surfaces that are
subsequently veneered with SR Adoro.
Heliobond Apparatus Time Program
Precuring time per
segment
Quick 60 s –
SR Adoro Step by Step
Application of the SR Adoro Gingiva materials
Once the veneering surface has been conditioned, directly
commence with the application of the SR Adoro Gingiva
materials in accordance with the individual shade
selection.
Given the different gingiva thickness, blood circulation,
and pigmentation, the gingiva exhibits different shade
effects. These effects have to be translated with
SR Adoro. The individual layering of the different Gingiva
shades enables a highly esthetic appearance to be achieved.