IHSE USA 480c Series Draco tera compact - Manual (Page 73)

Configuration
2013-08-14
73
5.4 System Settings
You have the possibility to configure the following system settings at the
Draco tera.
The configuration of the system settings can only be done by users with
administrator rights.
Pos: 59 /806-IHSE/Konfiguration/Systemeinstellung/480-xx/System Data @ 7\mod_1309938005493_6.doc @ 53050 @ 3 @ 1
5.4.1 System Data
The system configuration is set in this menu.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
Device Text Enter the device name of the matrix
(default: SWITCH_01)
Name Text Enter the name of the configuration that is
used to save the current settings
(default: Standard)
Info Text Additional text field to describe the
configuration (default: Factory settings)
activated If the matrix is defined as a sub matrix in
the OSD, the user will loose control
automatically. Control can be recovered by
using the keyboard command ,
, , . The OSD now will be
opened again in the matrix that has been
defined as sub matrix. Sub Matrix
deactivated Function not active (default)
activated
Starting the matrix after a restart or a
switch-on with the default configuration. Load Default
deactivated Starting the matrix after a restart or a
switch-on with the last saved configuration
(default).