IHSE USA 480c Series Draco tera compact - Manual (Page 131)

Configuration
2013-08-14
131
For an efficient macro configuration the following context functions are
available:
 When clicking on the tab Macros, macros can be assigned to other
consoles by using the function Assign Macros to ... and can be
copied from other consoles by using the function Copy Macros
from ....
 When clicking on the macro list, macros of the selected key can be
copied into the cache by using the function Copy Key Macros. You
can paste the macros from the cache into a key by using the function
Paste Key Macros and you can reset all macros of the selected key
by using the function Reset Key Macros.
Pos: 85 /806-IHSE/Konfiguration/480_Konsolen-Einstellungen/480-xx/Konkurrierende Bedienung @ 9\mod_1375170037949_6.doc @ 79211 @ 3 @ 1
5.8.6 Parallel Operation
In this chapter you can find an instruction of configuring the parallel
operation of a CPU Device by two or more CON Devices. The control of
the CPU Device can be done by only one CON Device at a time, but can
be taken over exclusively by other CON Devices, too. Taking over control
is immediately possible or after the expiry of an inactivity timer of the
controlling CON Device. You can use the mouse or keyboard in order to
take over control.
In order to allow a smooth and accurate function of the parallel operation,
you should use identical mice and keyboards. They should be connected
to the same USB-HID ports of each CON Unit.
The alternative is using the USB-HID Ghosting (see Chapter 6.10, Page
176).
You have the following possibilities to configure parallel operation: