IHSE USA 480c Series Draco tera compact - Manual (Page 38)

Draco tera
38
2013-08-14
Recording Function
All messages shown in the Syslog are equipped with various recording
functions.
 In order to store the messages shown in the Syslog (filtered or
unfiltered), press the button Save trace. The messages will be stored
in a .txt file.
 In order to remove the messages shown in the Syslog, press the
button Clear trace.
 In order to stop recording the messages, press the button Pause. In
order to continue press the button again.
Pos: 36 /806-IHSE/Beschreibung/SNMP/480-xx @ 8\mod_1352794857131_6.doc @ 69602 @ 2 @ 1
3.10 SNMP
When using the SNMP function, all function critical and safety critical parts
of the matrix can be monitored and their status can be queried. This
function complies with a RFC 1157 conformal standard.
When using SNMP monitoring, a dedicated network for reasons of access
security is strongly recommended.
You have the following possibilities to configure the SNMP monitoring: