IHSE USA 480c Series Draco tera compact - Manual (Page 44)

Draco tera
44
2013-08-14
4 Installation
Pos: 39 /806-IHSE/Installation/Lieferumfang prüfen/480-xxC @ 8\mod_1345735167559_6.doc @ 67893 @ 2 @ 1
4.1 Package Contents
Your package contains the following items:
 Draco tera matrix
 1x power cord per built-in power supply unit
 1x serial control cable
 1x RJ45/RS232 adapter
 Mounting accessories
 Quick Setup
 1x Cat X network cable (cross-wired)
If anything is missing, contact your dealer.
Pos: 40 /806-IHSE/Installation/System anschließen/480-xxC @ 8\mod_1345735496377_6.doc @ 67913 @ 2 @ 1
4.2 System Setup
First time users are recommended to setup the system in the same room
as a test setup. This will allow you to identify and solve any cabling
problems, and experiment with your system more conveniently.
Due to the construction of the matrix chassis it is recommended to use an
additional subfloor below the matrix for the use in a 19“ rack.
Setup of the matrix
1. Connect a CON Unit to an I/O port of the matrix for its configuration.
2. Connect keyboard, mouse and monitor to the CON unit.
3. Connect the matrix and the CON unit to the power supply.
4. Open OSD via 'Hot Key' and login with administrator rights in the
main menu under configuration (see Chapter 5.2.1, Page 53).
5. Configure initially as requested.
After the configuration of the system it is recommended to save the
configuration by selecting Configuration > Save and restart the matrix by
selecting Restart Matrix.