IHSE USA 480c Series Draco tera compact - Manual (Page 134)

Draco tera
134
2013-08-14
5.8.7 Multi-Screen Control
In this menu switching of USB-HID to control several connected sources
(computer, CPU) by a CON device with several monitors can be
configured. The switching can be performed for up to four connected
sources (computer, CPU) and is made smoothly by crossing the mouse
pointer beyond the respective monitor to the next one.
Thereby, the monitors can be arranged in sequence or as a square.
When using sources (computers, CPUs) in multi-head operation (e.g.
dual-head), the switching is only working manually via keyboard
commands. Any non-observance may have a negative influence on the
stability of the system.
In order to enable Multi-Screen Control, all Extender Units assigned to the
related CON device, have to be physically connected to the same block of
4 ports on the I/O board of the matrix.
CON Units that have been already configured for Multi-Screen Control can
be connected together to other blocks of 4 ports. In this case any further
configuration is not necessary. The functionality will be still available.
You have the following possibilities to access the menu: