IHSE USA 480c Series Draco tera compact - Manual (Page 148)

Draco tera
148
2013-08-14
Performing the Update
Take the following steps in order to be prepared for the matrix update:
1. Select Administration > Update Matrix Firmware in the task area.
All updateable components of the matrix will be automatically
selected and highlighted in green.
Menu Administration – Update Matrix Firmware
2. Start the update by pressing the button Update in the appearing
pop up window.
3. Restart the Matrix after the update by pressing the button Restart
matrix in the lower part of the working area.
For a safe initialisation of the matrix, a cold start (power cycle) is
recommended.