IHSE USA 480c Series Draco tera compact - Manual (Page 119)

Configuration
2013-08-14
119
In order to configure the access rights of consoles, proceed as follows:
1. Select a console in the list CON Devices.
2. Open the tab CPU Access Control.
3. Assign new access rights by using the right mouse button or the
respective keyboard commands (cf. below).
4. Confirm the configuration by pressing the button Apply.
You can select between the following keyboard commands:
Function Keyboard Command
Add CPU to list Full Access
Add CPU to list Video Access
Add CPU to list No Access
Pos: 79 /806-IHSE/Konfiguration/480_Konsolen-Einstellungen/480-xx/Maus und Tastatur @ 7\mod_1309938591211_6.doc @ 53272 @ 3 @ 1
5.8.2 Mouse and Keyboard
The OSD configuration for mouse and keyboard is made in this menu.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
Hor. Speed 1/x 1–9 Adjustment of the horizontal mouse
speed, 1 = slow, 9 = fast (default
value: 4)
Ver. Speed 1/x 1–9 Adjustment of the vertical mouse speed,
1 = slow, 9 = fast (default value: 5)
Double Click 100–800 Adjustment of the time slot for a double
click (default value: 200 ms)
Keyboard
layout Region Set the OSD keyboard layout according
to the used keyboard (default: German
(DE))
Video Mode Variable or
specific
resolution Resolution that is used when opening
OSD
The mouse and keyboard settings are console specific and can be
separately set for each console.