IHSE USA 480c Series Draco tera compact - Manual (Page 164)

Draco tera
164
2013-08-14
1. Select in the list CON Devices on the left side that one that should be
switched to a CPU device and open it by pressing .
2. Select in the list CPU Devices on the left side that one that should be
connected to the open CON device.
3. Confirm with the respective keyboard command according to the
desired connection type.
Switching operations from the own CON device can only be done to CPU
devices that are available in the list CPU Devices.
The following information is shown in this menu:
Field Description
CON device Assigned physical extender unit (CON unit)
CON assigned Virtual CON Device that is assigned to the real
CON device
CPU connected Currently connected CPU device
CON status
Current connection status (CON device)
EXT list List of all available physical extender units
(CON units)
CPU device Assigned physical extender unit (CPU unit)
CPU assigned Real CPU device that is assigned to a virtual
CPU device
CON
connected Currently connected CON device
CPU status Current connection status (CPU device)
EXT list List of all available physical extender units
(CPU units)
You can select between the following switching functions:
Function Keyboard Command
Set a video only connection.
Set a KVM connection.
Set a KVM connection in private mode (video
sharing disabled). +
Disconnect own CON device from CPU device.