IHSE USA 480c Series Draco tera compact - Manual (Page 129)

Configuration
2013-08-14
129
OSD
 Select via Configuration > CON Macros in the main menu that
console for which a console macro has to be created.
Menu Configuration – CON Macros
In order to create a macro for the selected console, proceed as follows:
1. Select in the field Key that one (1-16) for which a macro should be
created.
2. Select the respective place on the list (1-16) of the key that should be
set with a macro key.
3. Select for the highlighted position on the list a macro command in the
field Macro Data.
4. Set the necessary parameters P1 and P2 (e.g. CON Devices or CPU
Devices) for the selected macro command.
5. Confirm your inputs by pressing the key and repeat the
process for further macro commands, if necessary.