IHSE USA 480c Series Draco tera compact - Manual (Page 172)

Draco tera
172
2013-08-14
Pos: 116 /806-IHSE/Betrieb/Schaltmakros/480-xx @ 7\mod_1324449399385_6.doc @ 56882 @ 2 @ 1
6.7 Presets
Predefined macros to switch the matrix without loading a new
configuration can be created and activated in this menu.
You have the following possibility to access the menu:
 Select Control > Presets in the task area.
Menu Control – Presets
To create a new switch macro proceed as follows:
1. Open a new switch macro by pressing on the symbol New in the right
column of the working area.
You are asked if the existing connections shall be taken over for the
new switch macro.
2. Set the desired switching operations in the corresponding columns
(Full Access, Video Only or Private Mode) by using a double click
on the respective selection box or use the function for a disconnect
(Disconnect CPU).