3 user macros, Configuration – IHSE USA 480c Series Draco tera compact User Manual
Page 101
Configuration
2013-08-14
101
5.5.3 User Macros
In this menu macro commands for switching, disconnection or user
administration can be created. The macro commands are created for each
user separately.
A macro can execute up to 16 switching commands successively.
The execution of the macros is done via 'Hot Key' and the function keys
In order to execute user macros the user has to be logged in at the matrix.
You can select between the following settings:
Field
Selection
Description
Connect
(P1=CON,
P2=CPU)
Set bidirectional connection from
console P1 to CPU P2
Connect Video
(P1=CON, P2=
CPU)
Set video connection from console P1
to CPU P2
Disconnect
(P1=CON)
Disconnect console P1
Logout User
Logout current user
Set Real CPU
(P1=VCPU,
P2=RCPU)
Assign a virtual CPU to a real CPU
Set Virtual CON
(P1=RCON,
P2=VCON)
Assign a real console to a virtual
console
Push (P1=CON)
The own KVM connection is forwarded
to console P1 and is changed to a
video only connection.
Function
(01–16)
Push Video
(P1=CON)
The video signal of the current
connection (KVM or video only) is
forwarded to console P1. The own
connection remains unchanged (KVM
or video only).