IHSE USA 480c Series Draco tera compact - Manual (Page 105)

Configuration
2013-08-14
105
For an efficient macro configuration the following context functions are
available:
 Via right click on the tab Macros, macros can be assigned to other
users by using the function Assign Macros to ... and can be copied
from other users by using the function Copy Macros from ....
 Via right click on the macro list, macros of the selected key can be
copied into the cache by using the function Copy Key Macros. You
can paste the macros from the cache into a key by using the function
Paste Key Macros and you can reset all macros of the selected key
by using the function Reset Key Macros.
Pos: 74 /806-IHSE/Konfiguration/480_Extender-Einstellungen/480-xx @ 7\mod_1309938366618_6.doc @ 53197 @ 23333 @ 1
5.6 Extender Settings
All extender units are managed in this menu. This also contains the
creation of new extender units and the deletion of existing extender units.
The extender unit describes the connection of an physical extender to the
matrix. Every extender board with a direct cable connection to the matrix
is recognized as an extender unit. Dual-Head KVM extenders will be
recognized as two independent extender units.
KVM Extenders automatically create extender units inside the matrix.
You have the following possibilities to access the menu: